Malodorous gas has developed more and more in recent years. Many environmental problems are caused by the emission of malodorous gases. People inhale this malodorous gas and cause dizziness and other discomfort. Of course, if serious, it can cause chronic diseases and acute Disease, in this complex environment we need to control odorous gases. Generally, the composition of the foul odor gas is very complicated. Enterprises will emit a lot of waste gas during production, many of which are odorous gases. The odor gas is difficult to detect when it is detected. Therefore, government supervision is very difficult and it is also very difficult to govern. difficult. However, our company is best to deodorize these waste gases during production. This production will not cause great harm to the environment.
UV photo-catalytic exhaust gas purifier utilizes high-energy and high-ultraviolet ultraviolet light beams to decompose oxygen molecules in the air to generate free oxygen, ie, active oxygen. Oxygen molecules need to be combined with the positive and negative electrons carried by the free oxygen to generate ozone. UV+O2→O-+O*(active oxygen)O+O2→O3(ozone) It is known that ozone has a strong oxidizing effect on organic matter and has an immediate clearing effect on organic gas and other irritating odors. After the organic gas is discharged into the purification equipment by the exhaust equipment, the organic (odor) gas is subjected to a synergistic decomposition and oxidation reaction using a high-energy ultraviolet light beam and ozone, so that the organic gas material is degraded and converted into a low molecular compound, water, and carbon dioxide, and then passed. Exhaust ducts drain outdoors.
The catalyst (titanium dioxide) generates superoxide anion radicals and hydroxyl radicals with strong chemical reactivity when exposed to ultraviolet light, and attacks organic substances to degrade organic substances. Titanium dioxide is a non-dissolvable type material. It completely decomposes organic contaminants and kills sterilizing. It does not decompose and dissolve, and it has a long-lasting photocatalytic effect. It has a long-lasting effect of sterilizing and degrading pollutants.
1. Efficient removal of exhaust gas: Can effectively remove volatile organic compounds (VOC), benzene, inorganic substances, hydrogen sulfide, ammonia, mercaptans and other major pollutants, as well as all kinds of bad odor, deodorization efficiency Zui up to 90 Above 1%, the deodorization effect greatly exceeds the odor emission standard (GB14554-93) promulgated by the country in 2001.
2. Strong adaptability: It can be used to purify high concentration, atmospheric air, and different gas substances. It can work continuously for 24 hours a day, and the operation is stable and reliable.
3. Low operating cost: Without any mechanical action, no noise, no special personnel management and routine maintenance, only regular inspections are required. The energy consumption of the equipment is low, and the frequency of activated carbon replacement can be reduced to a low degree, reducing operating costs.
4. No pretreatment: The gas does not require special pretreatment, such as heating, humidification, etc., Laixi Machinery Factory spray paint exhaust gas processing equipment working temperature is between -30 °C -95 °C, humidity is 30% -98 %, PH value can work normally between 2-13.
5. The equipment has a small footprint and light weight: it is suitable for special conditions such as compact layout and narrow space.
6.Manufacture of high-quality imported materials: The equipment is safe, explosion-proof and corrosion-resistant. It has passed the Ex Ex-certification certificate (Certificate No.: CNEx13.0792 X) of the National Quality Supervision and Inspection Center for Explosion-Proof Electrical Products, which can be widely used in oil production (gas). Field, petrochemical, pharmaceutical and other industries with high explosion-proof requirements.
The uv photo-oxygen catalysis equipment generally needs to be installed in a place with good ventilation, and must also be used in the presence of a natural light source, so that the catalyst inside the device can be contacted with the ultraviolet light in the natural light source and generated. The oxidizing effect of ozone material can achieve ideal oxidation treatment effect for organic waste gas. The main application technology of photocatalytic equipment is the photocatalyst technology we often say. This technology requires the use of special wavelengths of UV lamps for installation and design. Workshops with different air volumes have more important effects on the number and arrangement of UV lamps. Under normal circumstances, the pressure of the fan can be used to gather the organic waste gas into the interior of the photocatalytic device. This relatively high concentration of exhaust gas will begin to split and purify under the influence of intense ultraviolet light beams. The advantage of this kind of equipment is that it can be installed and used in a low-concentration, high-air volume environment, and the ideal treatment effect can be obtained.
There is no need for special maintenance and management in everyday life. You can do regular inspections to see the specific conditions of the lamp and the use of the catalyst. However, if you are not a worker, you should not go to the work area. This can cause some hidden troubles in the normal operation of the equipment. At present, uv photo-oxygen catalysis equipment has been used in the treatment of various odorous gases. The treatment of odor does not require pretreatment, and work like humidification and humidification, which we are all familiar with, is not required. In order to meet the actual needs of factories in different regions, the equipment is made of high-quality 304 stainless steel, which can have good effects in terms of fire resistance and corrosion resistance, and can improve the service life and purification safety of the equipment to some extent.
Our company also main to design Plastic Products, Paper Products, Wooden Products, Household Products, Stationery Products, Sewing Products and so on
Triple C International (ShenZhen) Co.,Ltd. was established in 2018. It`s a professional foreign trade company engaged in import and export trade, and carries out business operations such as international trade, cooperative production and intermediary trade. The company mainly provides high-quality OEM-product and ODM-product services for customs in Japan, Southeast Asia, Europe and Unite States, and has a professional technical team that provides hundreds of OEM-product services for dozens of customers, and has dozens of excellent suppliers. The company mainly provides sewing products, plastic products, paper products, wooden products, household products and other OEM services, including handbags, gift boxes,
Storage Boxes, stationery boxes, kid toys,
Paper Boxes, school supplies, office supplies and other products import and export business.
