The difficulty in controlling the opening of color corrugated boxes is that the properties of the glue before the glue is completely cured are difficult to grasp when the glue box is in operation. It is necessary to stabilize the glue by controlling the parameters of the glue. In addition, several parameters such as viscosity, solid content, pH value, and shelf life should be controlled in the incoming inspection of glue. The glue is easily degraded, and the temperature of the storage environment is generally below 5°C.
It is considered to be the most difficult process investment purchase, but due to the glue box process must use glue boxes and other chemical materials, resulting in an increase of variable factors in the process, the corresponding increase in the risk of quality. Corrugated box opening glue is a common paste box quality problem, and it is also a key control project of the paste box process. For the control of corrugated boxes, the author has some superficial experience and views of printability, and is now shared with colleagues in the printing and packaging industry.
Correct selection of glue glue
To control the corrugated box glue box without opening the glue, it is very important to use the right glue box glue. Once the paste box glue is used wrong, it will cause the whole batch of corrugated box to open.
The basic principle of choosing glue glue is: Select different glue according to the different surface treatment methods of corrugated box paper.
If the corrugated box's sticky mouth is plain paper and common paper surface, sticky box can use ordinary white latex; if it is paper and film surface (including light film and matte film) bonded label, paste box Need to use paper plastic water, but also with the film surface material selection of different paper plastic water, such as PET or OPP film surface in the paste box should be used when selecting different paper plastic water; if it is paper and UV The surface of the varnish is bonded, and the UV glue is used when gluing; if it is the bond of the paper surface with the polished surface, the polishing glue is needed when the paste box is used.
Scanning format: hand-glued or gluing cartridges are slow in speed, and fine-printing research is conducted. Open time (from the time when the glue is in contact with the adhesive and the adhesive can no longer move freely) should be selected; the automatic glue or paste box The speed is fast and glues with short opening time should be used.
When using glue glue, you must also consider the working environment of the paste box workshop. The glue used in winter and the glue used in summer are different in the ratio, because the same brand, the same batch of glue, digital printing at different ambient temperatures, the viscosity is different, the lower the ambient temperature, The higher the viscosity of the glue. Whether it is winter or summer, the sticking box production process requires the glue to reach the viscosity that is most convenient for the production operation. Due to the low temperature in winter and the higher viscosity of Esko, the adhesive manufacturer of corrugated box manufacturers will have a certain influence if they add thinner to adjust the viscosity of the glue.
Therefore, the use of glue at lower ambient temperatures, to maintain the glue adhesive force and the normal reaction mechanism of the glue, it is necessary to make corresponding adjustments to the formulation of the glue Beiren Group, which is also a lot of use in the South is very mature The reason why the glue cannot be used directly in the north is. In addition, we must also consider the use of corrugated boxes, if the corrugated box after the cassette needs to be sent to a high-temperature environment, you need to use a high-temperature paste glue box; if the paste box after the corrugated box needs to be sent to a low temperature environment The use of packaging design, you need to use a low temperature paste glue box.
Polishing performance: If the automatic folder-gluer is equipped with a spray gun, it must use the appropriate glue. At the same time, the performance of the gun control system must also be considered. If the gun control system is a hot melt method, hot melt adhesive must be used; if the gun control system is digitally printed in China without heating, a cold spray adhesive must be used. (To be continued)
Our company also main to design Plastic Products, Paper Products, Wooden Products, Household Products, Stationery Products, Sewing Products and so on
Triple C International (ShenZhen) Co.,Ltd. was established in 2018. It`s a professional foreign trade company engaged in import and export trade, and carries out business operations such as international trade, cooperative production and intermediary trade. The company mainly provides high-quality OEM-product and ODM-product services for customs in Japan, Southeast Asia, Europe and Unite States, and has a professional technical team that provides hundreds of OEM-product services for dozens of customers, and has dozens of excellent suppliers. The company mainly provides sewing products, plastic products, paper products, wooden products, household products and other OEM services, including handbags, gift boxes, Storage Boxes, stationery boxes, kid toys, Paper Boxes, school supplies, office supplies and other products import and export business.
